HP P6350 Manual do Utilizador descarregar pdf (Página 154)

NOTE: For additional risks, see “Windows Servers” (page 165).

Limitations

• HP P6000 Continuous Access is not supported with single path configurations.

• Single path HBA server is not part of a cluster.

• Booting from the SAN is not supported on single path HBA servers.

Figure 76 Windows Server 2003 (32-bit) and Windows 2008 (32–bit) configuration

5. SAN switch 11. Network interconnection

6. SAN switch 22. Single HBA server (Host 1)

7. Controller A3. Dual HBA server (Host 2)

8. Controller B4. Management server

Windows Server 2003 (64-bit) and Windows Server 2008 (64–bit)

configurations

Requirements

• Switch zoning or controller level SSP must be used to ensure each single path HBA has an

exclusive path to its LUNs.

• Single path HBA server can be in the same fabric as servers with multiple HBAs.

• Single path HBA server cannot share LUNs with any other HBAs.

HBA configuration

• Hosts 1 and 2 are single path HBA hosts.

• Host 3 is a multiple HBA host with multipathing software.

See Figure 77 (page 155).

NOTE: Single path HBA servers running the Windows Server 2003 (x64) or Windows Server

2008 (x64) operating system will support multiple single path HBAs in the same server. This is

accomplished through a combination of switch zoning and controller level SSP. Any single path

HBA server will support up to four single path HBAs.

154 Single path implementation

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 315 316

Sem comentários

HP P6350 Manual do Utilizador Página 154