Hp OneView for VMware vCenter Manual do Utilizador descarregar pdf (Página 61)

• Host Access

P4000—Host access level assigned to the presentation of the disk to the host (for example,

READ/WRITE or READ-ONLY)

◦

◦ 3PAR—N/A. 3PAR storage volumes operate in a read-only/read-write configuration.

◦ P6000 EVA—Host access level assigned to the presentation of the disk to the host (for

example, READ/WRITE or READ-ONLY)

◦ P2000/MSA2000—Access setting for volume mapping (for example, READ/WRITE or

READ-ONLY)

◦ P9000/XP—Host access level assigned to the volume

NOTE: The P9000 or XP array does not allow host access to be specified on a per-host

or per-path basis.

• Array Port Speed

P4000—Not applicable◦

◦ 3PAR—Speed at which the port is connected to the SAN (Gb/s)

◦ P6000 EVA—Speed at which the port is connected to the SAN (Gb/s)

◦ P2000/MSA2000

FC—Speed at which the port is connected to the SAN (Gb/s)–

– iSCSI—Speed at which the network port is connected to the network (Gb/s)

– SAS—Speed at which the port is connected to the host or switch (Gb/s)

◦ P9000/XP—Speed at which the port is connected to the SAN (Gb/s)

• Host Mode

P4000—Not applicable◦

◦ 3PAR—Not applicable

◦ P6000 EVA—Host mode assigned to the P6000 EVA host object

◦ P2000/MSA2000—Name of the host's profile

◦ P9000/XP—Host mode assigned to the host group

• Preferred Path

P4000—Not applicable◦

◦ 3PAR—Not applicable

◦ P6000 EVA—Specifies whether the path uses a port on the controller that is configured

as the preferred path for the vdisk (Yes, No, No preference)

◦ P2000/MSA2000—Not applicable

◦ P9000/XP—Not applicable

• Active Path—Specifies whether the path is active or in standby status

If a path is active and then goes offline, a standby path takes over.

Using the Storage Module for vCenter 61

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 106 107

Sem comentários

Hp OneView for VMware vCenter Manual do Utilizador Página 61