HP PROCURVE 2520 Manual do Utilizador descarregar pdf (Página 179)

100

101

Configuring IP Addressing

IP Configuration

Note Designating a primary VLAN other than the default VLAN affects the switch’s

use of information received via DHCP/Bootp. For more on this topic, refer to

the chapter describing VLANs in the Advanced Traffic Management Guide

for your switch.

After you reconfigure or reboot the switch with DHCP/Bootp enabled in a

network providing DHCP/Bootp service, the switch does the following:

■ Receives an IP address and subnet mask and, if configured in the server,

a gateway IP address and the address of a Timep server.

■ If the DHCP/Bootp reply provides information for downloading a config-

uration file, the switch uses TFTP to download the file from the designated

source, then reboots itself. (This assumes that the switch or VLAN has

connectivity to the TFTP file server specified in the reply, that the config-

uration file is correctly named, and that the configuration file exists in the

TFTP directory.)

8-15

1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 543 544

Comentários a estes Manuais

Sem comentários

HP PROCURVE 2520 Manual do Utilizador Página 179

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP PROCURVE 2520