Hp 3000 Enterprise Virtual Array Manual do Utilizador Página 32

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 188
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 31
Browser
Host X
FCA
Storage
Management
Appliance
Command
View EVA
CXO8099
B
Controller
A
FCA FCA FCA
Host Z
Browser
Non-Host
FP1 FP2
Loop
Pair 1
Loop
Pair 2
Loop
Pair 1
Loop
Pair 2
Controller
B
FP1 FP2
Network Interconnection
Drive Enclosures
Fabric 2
F
P = Fibre (Host) Port
F
CA = Fibre Channel Adapter
Cache
Mirror Port
B
A
B
A
Fabric 1
Figure 10 Block diagram of the storage system’s connections
EVA3000 storage system connections
Figure 10 shows a typical Enterprise Virtual Array 3000 SAN topology:
The HSV
controllers connect via por ts FP1 and FP2 to two Fibre Channel fabrics. The hosts
that will access the storage system are connected to the same fabrics. Note that FP1 on each
controller is connected to a different fabric to balance the I/O load.
Command View EVA , which runs on the storage management appliance, also connects to both
fabrics.
The co
ntrollers connect through one loop pair to the drive enclosures. The loop pair consists of
two i
ndependent loops, each capable of managing all the disks should one loop fail.
Procedures for getting started
Follow the process below to guide you through the installation of the storage system:
1. G ather information and identify all related storage system documentation.
2. Contact a n authorized service representative for hardware conguration.
3. Enter the storage system World Wide Nam e (WWN) into the OCP.
4. Congure Command View EVA.
5. Prepare the hosts.
6. Congure the system through Command View EVA.
32
Startup and operation
Vista de página 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 187 188

Comentários a estes Manuais

Sem comentários