Hp Compaq StorageWorks TL881 DLT Mini-Library Manual do Utilizador Página 179

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 178
D-4 Compaq TL881 Minilibrary System Users Guide
Removing and Replacing the Cover Plate
Removing
Do these steps to remove the cover plate from the base module.
1. If the base module is a desktop model, remove the skin cover as
described in Removing and Replacing the Skin Cover (Desktop Models
Only).
2. Disconnect the power and interface cables at the rear of the module.
3. Unscrew the captive screw in the center of the cover plate (Figure D-3).
4. Slide the cover plate one-half inch toward the rear of the module.
5. Lift the cover plate off the base module.
Replacing
Do these steps to replace the cover plate on the base module.
1. Place the cover plate on the base module so that it overhangs one-half
inch at the rear of the module (Figure D-3).
2. Slide the cover plate toward the front of the base module until the cover
plate touches the front panel.
3. Tighten the captive screw in the center of the cover plate.
4. Connect the power and interface cables at the rear of the module.
5. If the base module is a desktop model, replace the skin cover as
described in Removing and Replacing the Skin Cover (Desktop Models
Only).
Vista de página 178
1 2 ... 174 175 176 177 178 179 180 181 182 183 184 ... 199 200

Comentários a estes Manuais

Sem comentários