3. Creating an HDLM Environment
124
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Remove LU : off
Intermittent Error Monitor : off
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
21. Use the results of the
view operation to check the version of the installed HDLM.
If
x.x.x-xx is displayed in HDLM Version, the correct version of HDLM has
been installed.
22. Use the results of the
view operation to check that the programs are running
properly.
If
HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
the programs are running correctly.
23. Check the path information as described in 3.6 Checking the Path Configuration,
and make sure that you have successfully installed HDLM in a single-path
configuration.
24. Connect cables to all the HBAs to change the configuration to a multi-path
configuration.
Figure 3-4: Single Path Configuration and Multi-path Configuration shows a
single path configuration and a multi-path configuration.
Comentários a estes Manuais