Hp MPX200 Multifunction Router Manual do Utilizador descarregar pdf (Página 50)

Authority

Admin session

Syntax

set vpgroups [<vpgroup_index>]

Example

The following example shows how to enable virtual port groups 2 and 3:

MPX200 <1> (admin) #> set vpgroups

The following wizard will query for attributes before persisting

and activating the updated mapping in the system configuration.

If you wish to terminate this wizard before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Configuring VpGroup: 1

-------------------------

Status (0=Enable, 1=Disable) [Enabled ]

VpGroup Name (Max = 64 characters) [VPGROUP_1 ]

All attribute values for VpGroup 1 that have been changed will now be saved.

Configuring VpGroup: 2

-------------------------

Status (0=Enable, 1=Disable) [Disabled ] 0

VpGroup Name (Max = 64 characters) [VPGROUP_2 ]

All attribute values for VpGroup 2 that have been changed will now be saved.

Configuring VpGroup: 3

-------------------------

Status (0=Enable, 1=Disable) [Disabled ] 0

VpGroup Name (Max = 64 characters) [VPGROUP_3 ]

All attribute values for VpGroup 3 that have been changed will now be saved.

Configuring VpGroup: 4

-------------------------

Status (0=Enable, 1=Disable) [Disabled ]

All attribute values for VpGroup 4 that have been changed will now be saved.

show

Displays blade operational information.

Authority

None

Syntax

show {chap | chassis | event_notification | fc [<port_num>] | fciproutes

initiators_lunmask | iostats | iscsi [<port_num>] | isns [<port_num>]

[[fc | gige] <port_no> <hours | mins> <duration>] | presented_targets

[<vpgroup_index>] | zone}

50 Command reference

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 146 147

Sem comentários

Hp MPX200 Multifunction Router Manual do Utilizador Página 50