Hp StorageWorks 1000 Modular Smart Array Manual do Utilizador descarregar pdf (Página 33)

Controller Display Messages

33MSA1000 Controller User Guide

05 SYSTEM NAME:

<name>

Informational Displays the user assigned

name for the MSA1000

system. This name can be

assigned using the Array

Configuration Utility

(ACU).

06 RESTARTING

SYSTEM

Informational Indicates that the system

has been reset and is being

restarted.

20 INITIALIZING

SCSI SUBSYSTEM

Informational The SCSI subsystem is

being initialized as part of

the power on sequence.

21 SCANNING FOR

SCSI DEVICES

Informational The firmware is searching

for SCSI devices attached

to the system as part of the

power on sequence.

22 INITIALIZING

SCSI DEVICES

Informational The firmware is initializing

all SCSI devices attached to

the system as part of the

power on sequence.

23 SCSI

SUBSYSTEM

HARDWARE FAILURE

Error The SCSI subsystem on

MSA1000 has experienced

a hardware failure and is

not operating correctly. The

array controller has halted

itself and cannot continue.

Please contact HP support.

24 BAD SCSI BUS

MODE NON-LVD

DEVICE FOUND

Error The MSA1000 does not

support SCSI Single Ended

(SE) devices, it only

supports SCSI Low Voltage

Differential (LVD) devices.

The MSA1000 should be

powered off and then all

SCSI devices attached to it

should be examined. Any

SE devices found should be

removed and replaced with

LVD devices.

Table 3: LCD Message Descriptions

Message Type Description Action

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Comentários a estes Manuais

Sem comentários

Hp StorageWorks 1000 Modular Smart Array Manual do Utilizador Página 33

Comentários a estes Manuais

Manuais e produtos relacionados com Armazenamento Hp StorageWorks 1000 Modular Smart Array