Hp XP External Storage Software Manual do Utilizador Página 93
- Página / 138
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Restoring the Pa
ths to the External Volume (Check Paths)
You use the Check Paths command to resume using the cross-subsystem path which was stopped by the
Disconnect Paths command.
Note:
The path h
as to be in a status that can be restored.
To restore the path to the external volume:
1. Start Remote Web Console, and open the Path Operation window.
2. Make sure that
Remote Web Console is in Modify mode.
3. Select one of the following from the drop-down list above the Path Operation tree.
• Fibre - Local Subsystem: Displays the ports in the local storage system. Select Fibre - Local
Subsystem to restore all the cross-subsystem paths connected to the specified port in the
local storag
esystem.
• Fibre - External Subsystem: Displays the WWNs in the external storage system. Select Fibre
-ExternalSubsystem to restore all the cross-subsystem paths connected to the specified
WWNs (ports) in the external storage system.
4. Click Subsy
stem or the product name in the Path Operation tree.
5. Right-click the port or WWN that you want to restore in the Path Operation list.
Apop-up menuis displayed.
6. Click Check
Paths in the pop-up menu.
The settings are displayed in blue and italics.
7. Verify the settings in the Preview dialog box (see “Preview Dialog Box” on page 57).
8. Click Apply in the Path Operation window.
The settin
gs are applied to the local storage system and the Path Operation window is displayed
normally.
When an error occurs, an error message is displayed. Verify the details in the
Preview dialog box.
Changing the Cache Mode Setting of the External Volume
You can change the cache mode of the external volume in the Volume Operation window. To change
the cache mode of the external volume, you need to right-click the external volume, click the Change
Cache Mode in the pop-up menu, and then click Enable or Disable.
You need to check the following before changing the cache mode of the external volume.
• Whether thevolumeisnot setasavolume whichconstitutes apartofaLUSE volume.
When it is setasavolume whichconstitutes apartofaLUSE volume,the cachemodesetting
should be same among all volumes which constitutes a LUSE volume.
• Whether the bind mode of Cache Residency Manager is not set.
When the bind mode is set, you cannot change the cache mode from Enable to Disable.To
change thecache modeto Disable, cancel the setting for Cache Residency Manager or change
the cache residency mode to the priority mode.
• Whether the volume is not a remote command device.
When the volume is a remote command device, you cannot change the cache mode from Disable
to Enable.
To change the cache mode of the external volume:
1. Start Remote Web Console, and open the Volume Operation window.
2. Make sure that Remote Web Console is in Modify mode.
3. Click the path group in the Volume Operation tree.
4. Right-click the external volume that you want to change in the Volume Operation list.
Apop-up menuis displayed.
5. Click Change Cache Mode in the pop-up menu and click Enable or Disable in the submenu.
The settings are displayed in blue and italics.
XP24000 External Storage Software User’s Guide
93
- HP StorageWorks 1
- Edition 2
- Description 2
- Contents 3
- Figures 7
- About this Guide 11
- XP External Storage Software 13
- Figure 2 15
- 2 About External Storage 17
- Operations 17
- External Storage Components 18
- Volumes and Mapping Paths 19
- External Storage Operations 20
- Configuring External Storage 20
- Choosing the External Port 21
- Configuring Ex 22
- Cross-subsyste 23
- Connecting Mainframe Volumes 29
- Choosing Mapping Policy 30
- Interope 33
- Continuous Access Operations 36
- Business Copy Operations 39
- XP Snapsh 40
- Figure 18 41
- Capacity Guidelines 45
- Volume Attribute Guidelines 47
- Performan 48
- RAID Level Considerations 48
- Starting Ex 49
- 4UsingtheExternalStorageGUI 51
- Volume Operation Tree 52
- Preview Dialog Box 57
- Path Operation Window 58
- Path Operation Tree 60
- Port Operation Window 63
- Port Operation T 65
- Port Operation List 65
- Setting Por 68
- Mapping an Ex 69
- Caution: 70
- Add Volume Dialog Box 71
- LDEV Mapping (Au 74
- SSID Dialog Box 76
- Configuring Cros 81
- Canceling the Cr 83
- LDEV Information Dialog Box 84
- Displayed Item 86
- Turning On or Of 87
- External Volume 89
- Checking Con 91
- Operation 91
- Resuming an Ind 92
- Restoring the Pa 93
- Changing the I 94
- Editing M 95
- 6 Remote Command Devices 99
- Remote Command Devices 100
- Remote Command Device 102
- : Cable 103
- : Ports of Standard mode 103
- 7 Troubleshooting 107
- Corrective Action 108
- Calling HP Technical Support 111
- Troubleshooting 112
- AConnectingExternalStorage 113
- Systems 113
- System Model 114
- TagmaStore W 115
- Thunder 9500V Storage System 116
- Window Names 117
- Parameters 117
- Parameter Settings 117
- Controller 118
- USP V Storage System 119
- System) 122
- SVS200 Storage System 123
- EVA Storage System 124
- 6120/6320 125
- Non-HP Storage Systems 126
- BRequiredVolumeCapacityfor 127
- Each Emulation Type 127
- Capacity 129
- List for Each Emulation Type 129
- DAcronymsand Abbreviations 135
- Acronyms and Abbreviations 136
- Volume Operation Window,51 138
Manuais e produtos relacionados com Armazenamento Hp XP External Storage Software
(52 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.041 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais