
Troubleshooting
160 HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
5014 Drive Already Loaded
(Cleaning operation failed because the
drive already has a cartridge inserted.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ If the tape in the drive is not in use, unload
the drive and retry the cleaning operation.
5015 Expired Clean'g Cart
(Cleaning operation failed due to an
expired cleaning cartridge.)
■ Press the Enter button to clear the
message.
■ Remove expired cleaning cartridge from
library and discard. Replace with new
cleaning cartridge.
5016 Not a Clean'g Cart
(Cleaning operation failed because the
loaded cartridge is not a cleaning
cartridge.)
■ Press the Enter button to clear the
message.
■ Make sure tape in reserved slot is a
cleaning cartridge.
■ Invalid user initiated operation. Set
parameters correctly and try again.
5035 Drive Timeout Error
(Cleaning operation failed because the
drive timed out.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ Ensure the drive shows good status
through the drive status window.
503B Move Command Fail
(A front panel move operation failed.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
503C Clean Operation Timeout
(Cleaning operation failed because the
drive timed out.)
■ Press the Enter button to clear the
message.
■ Invalid user initiated operation. Set
parameters correctly and try again.
■ Ensure the drive shows good status
through the drive status window.
Table 11: Fault Symptom Codes (Continued)
FSC Message ERP
Comentários a estes Manuais