Hp ProLiant BL685c Server-Blade Manual do Utilizador Página 42
- Página / 93
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Software and configuration utilities 42
NOTE: Actual NIC numeration depends on several factors, including the OS installed on the server blade.
To deploy an OS to multiple server blades, install a PXE deployment server on a network.
Deployment infrastructure
IMPORTANT: To connect to a network with a Pass-Thru module, always connect the Pass-Thru module to a
network device that supports Gigabit speed.
To establish a network-based PXE deployment infrastructure, provide the following software and minimum
hardware:
• Client PC (administrative workstation)
• AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® III or higher processor (700 MHz or greater recommended)
• 128 MB of RAM
• Microsoft® Windows® 2000 Professional or Microsoft® Windows® XP OS
• Microsoft® Internet Explorer 5.5 or above with 128-bit encryption
• Ethernet NIC with 10/100 RJ-45 connector
• TCP/IP networking and an IP address compatible with one of the following: the iLO 2 Diagnostic
Port IP address or an assigned DHCP or static IP address
• CD-ROM drive, CD/DVD-ROM drive, and/or diskette drive
• Any of the following Java™ Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™ Runtime Environment versions at the HP website
(http://java.sun.com/products/archive/index.html
).
• DHCP server (IP address assignment)
• AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® or Pentium® II 200-MHz or faster processor
• 64 MB of RAM
• 64 MB of free hard drive space
• 10-Mb/s network adapter
• PXE deployment server (storing boot images)
• AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® III or higher processor (500 MHz recommended)
• 256 MB of RAM
• 10-Mb/s network adapter
• CD-ROM drive
• Windows® repository server (Windows® or Linux deployment)
• Windows® 2000 or Windows Server™ 2003 OS installed
• Network connection
• CD-ROM drive
• 1.5 GB of available disk space
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs 7
- SAS and SATA hard drive LEDs 8
- System board components 9
- DIMM slots 10
- System maintenance switch 10
- Accessing the redundant ROM 11
- Local I/O cable 12
- Operations 13
- Remove the server blade 14
- Remove the access panel 14
- Remove the DIMM baffle 15
- Install the DIMM baffle 15
- Install the access panel 15
- Operations 16 16
- Overview 17
- Installing a server blade 18
- Remove the blank 19
- Setup 20 20
- Remove the connector covers 21
- Connecting to the network 23
- Completing the configuration 23
- Introduction 24
- Remove the hard drive blank 25
- Prepare the hard drive 25
- Processor option 26
- Memory option 31
- Advanced ECC memory 32
- DIMM installation guidelines 32
- DIMM population order 32
- Installing DIMMs 32
- Mezzanine card option 33
- Cabling 37
- In this section 40
- Network-based PXE deployment 41
- Deployment infrastructure 42
- Deployment methods 43
- CD-ROM deployment 44
- Diskette image deployment 45
- Configuration tools 46
- HP ROM-Based Setup Utility 47
- Array Configuration Utility 48
- Management tools 49
- Erase Utility 50
- HP Systems Insight Manager 50
- Management Agents 50
- Redundant ROM support 51
- Diagnostic tools 52
- Survey Utility 53
- Integrated Management Log 53
- Array Diagnostic Utility 53
- Keeping the system current 54
- ProLiant Support Packs 55
- Care Pack 55
- Troubleshooting 56
- Important safety information 57
- Symptom information 58
- Service notifications 59
- Loose connections 59
- Troubleshooting flowcharts 59
- Start diagnosis flowchart 60
- General diagnosis flowchart 61
- Symptoms: 62
- POST problems flowchart 64
- OS boot problems flowchart 65
- Troubleshooting 67 67
- Possible causes: 68
- Redundancy failure 68
- Troubleshooting 69 69
- Battery replacement 70
- FCC rating label 71
- FCC logo, United States only 72
- Modifications 73
- Japanese notice 74
- BSMI notice 74
- Korean notice 75
- Laser compliance 75
- Battery replacement notice 75
- Electrostatic discharge 77
- Specifications 78
- Technical support 79
- Customer Self Repair 81
- Technical support 82 82
- Reparo feito pelo cliente 83
- Technical support 84 84
- Technical support 85 85
- Technical support 86 86
- Acronyms and abbreviations 87
- Web-Based Enterprise Service 90
- Wired for Management 90
- Index 91 91
- Index 92 92
- Index 93 93
Manuais e produtos relacionados com Hardware de computador Hp ProLiant BL685c Server-Blade
(118 páginas)© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.032 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais