HP DV3 Informações Técnicas descarregar pdf (Página 74)

4. Remove the three Phillips PM2.5×5.0 screws (2) that secure the system board to the base

enclosure.

5. Flex and hold the left edge of the base enclosure slightly (1) until the audio connectors (2) are

clear of the openings in the base enclosure.

6. Use the corner of the system board (3) near the optical drive connector to lift the front edge of

the system board (4) until it rests at an angle.

7. Remove the system board (5) by sliding it up and forward at an angle.

Reverse this procedure to install the system board.

64 Chapter 4 Removal and replacement procedures

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 115 116

Sem comentários

HP DV3 Informações Técnicas Página 74