HP Pavilion DV6000t Informações Técnicas descarregar pdf (Página 76)

Remove the following:

(1) Three Phillips PM2.5×2.0 screws in the optical drive bay

(2) One Phillips PM2.5×5.0 screw on the rear edge of the base enclosure

(3) Three Phillips PM2.5×7.0 screws on the rear edge of the base enclosure that secure the top cover

trim to the computer

(4) Two HM5.0×9.0 standoffs in the memory/WLAN module compartment

Turn the computer right-side up, with the front toward you.

8. Release and disconnect the TouchPad cable (1) from the ZIF connector on the system board.

Remove the following screws:

(2) Two Phillips PM2.5×7.0 screws

(3) Two Phillips PM2.5×4.0 screws

(4) One Phillips PM2.5×5.0 screw that secures the top cover trim to the computer

68 Chapter 4 Removal and replacement procedures ENWW

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 147 148

Sem comentários

HP Pavilion DV6000t Informações Técnicas Página 76