HP Pavilion DV6000t Informações Técnicas descarregar pdf (Página 84)

5. Release the system board (4) by sliding it to the right until the connectors on the left side of the system

board disengage from the base enclosure.

Remove the system board.

If it is necessary to replace the USB/power connector board cable, turn the system board upside

down with the expansion port 3 toward you.

8. Disconnect the power connector cable (1) and the USB board cable (2) from the system board.

NOTE: The USB/power connector board cable is included in the Cable Kit, spare part number

446519-001.

Reverse the above procedure to install the system board and USB/power connector board cable.

76 Chapter 4 Removal and replacement procedures ENWW

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 147 148

Sem comentários

HP Pavilion DV6000t Informações Técnicas Página 84