HP Firewall Series Manual de Instalação descarregar pdf (Página 23)

CAUTION:

• When you connect a PC to a powered-on firewall, connect the DB-9 connector of the console cable to

the PC before connecting the RJ-45 connector to the firewall.

• When you disconnect a PC from a powered-on firewall, disconnect the DB-9 connector of the console

cable from the PC after disconnecting the RJ-45 connector from the firewall.

Setting terminal parameters

Follow these steps to set terminal parameters on a terminal, for example, Windows XP HyperTerminal:

Step1 Select Start > All Programs > Accessories > Communications > HyperTerminal to enter the

HyperTerminal window. The Connection Description dialog box appears, as shown in Figure 18.

Figure 18 Connection description

of the HyperTerminal

Step2 Type the name of the new connection in the Name text box and click OK. The following dialog box

appears. Select the serial port to be used from the Connect using drop-down list.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

Sem comentários

HP Firewall Series Manual de Instalação Página 23