HP Firewall Series Manual de Instalação descarregar pdf (Página 7)

Preparing for installation

This chapter includes these sections:

• Safety recommendations

• Examining the installation site

• Installation tools

• Accessories supplied by the firewall

• Checklist before installation

Safety recommendations

To avoid possible bodily injury and equipment damage, read the safety recommendations in this chapter

carefully before installing an A-F1000-A-EI/A-F1000-S-EI firewall. The recommendations do not cover

every possible hazardous condition.

This section includes these topics:

• Safety symbols

• General safety recommendations

• Safety with electricity

• Safety with laser

Safety symbols

When reading this document, note the following symbols:

WARNING means an alert that calls attention to important information that if not understood or

followed can result in personal injury.

CAUTION means an alert that calls attention to important information that if not understood or

followed can result in data loss, data corruption, or damage to hardware or software.

General safety recommendations

• Keep the chassis and installation tools away from walk areas.

• Make sure that the ground is dry and flat and anti-slip measures are in place.

• Unplug all the external cables (including power cables) before moving the chassis.

Safety with electricity

• Locate the emergency power-off switch in the room before installation. Shut the power off at once in

case accident occurs.

• Make sure that the firewall has been correctly grounded.

• Connect the interface cables for the firewall correctly.

• Use an uninterruptible power supply (UPS).

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Sem comentários

HP Firewall Series Manual de Instalação Página 7