HP 10BASE-T Guia do Utilizador descarregar pdf (Página 14)

Installation Summary

The basic hardware installation procedure for the Hub-16U is as follows:

1. Install the optional HP AdvanceStack 8U/16U SNMP Module and/or

one of the optional HP Transceiver Modules.

2. Verify the hub’s operation.

3. Mount the hub in a rack, on a wall, or place it on a tabletop.

4. Connect the hub to a network, and connect computer(s) and/or

other device(s) to the hub’s ports.

Included Parts

Each Hub-16U has the following components shipped with it:

HP AdvanceStack Hub-16U Installation and Reference Guide—this

manual (J2611-90101)

A power cord, one of the following:

Australia/New Zealand

Denmark

Europe

Japan

Switzerland

United Kingdom

U.S./Canada

(8120-1369)

(8120-2956)

(8120-1689)

(8120-4753)

(8120-2104)

(8120-1351)

(8120-1378)

accessory kit:

– two mounting brackets

– four rubber feet

– one tie-wrap

– four 3/8-inch M3 machine screws

– four 5/8-inch number 12-24 screws

Installing the Hub

1-2

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 69 70

Sem comentários

HP 10BASE-T Guia do Utilizador Página 14