HP 10BASE-T Guia do Utilizador descarregar pdf (Página 18)

2. Verify the hub’s operation

To provide power to the hub, follow these steps:

1. Plug the power cord into the hub’s power cord receptacle and into an

ac power source.

Note If your installation requires a different power cord than the one

supplied with the hub, be sure to use a power cord displaying the

mark of the safety agency that defines the regulations for power

cords in your country. The mark is your assurance that the power

cord can be used safely with the hub.

Note The hub does not have a power switch; it is powered on when the power

cord is plugged in.

Power receptacle

on the back of the hub

Installing the Hub

1-6

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 69 70

Sem comentários

HP 10BASE-T Guia do Utilizador Página 18