HP 620n Guia do Utilizador descarregar pdf (Página 100)

ENWW TCP/IP Configuration 100

Moving to Another Network

Note For HP Jetdirect wireless print servers, this section

assumes that a wireless connection to your network

has been established.

Moving an HP Jetdirect wireless print server to

another network will require a new wireless

connection to that network.

When moving an HP Jetdirect print server that is configured with

an IP address to a new network, make sure that the IP address does

not conflict with addresses on the new network. You may change

the IP address of the print server to one that can be used on the new

network, or erase the current IP address and configure another

address after it is installed on the new network. See Chapter 8

“Troubleshooting the HP Jetdirect Print Server

,” for instructions to

reset the print server to factory default settings.

If the current BOOTP server is not reachable, you may need to

locate a different BOOTP server and configure the printer to this

server.

If the print server was configured using BOOTP, DHCP or RARP,

edit the appropriate system files with updated settings. If the IP

address was manually set (for example, from the printer control

panel or Telnet), reconfigure IP parameters as described in this

chapter.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 263 264

Sem comentários

HP 620n Guia do Utilizador Página 100