HP 620n Guia do Utilizador descarregar pdf (Página 39)

ENWW TCP/IP Configuration 39

● arp and ping commands. (For print servers configure with

Legacy default IP address 192.0.0.192 only) You can use the arp

and ping commands from your system. For more information,

see “Using the arp and ping Commands

”.

● Telnet. You can set configuration parameters using Telnet. In

order to set configuration parameters, set up a Telnet

connection from your system to the HP Jetdirect print server

using the default IP address. Once configured, the print server

saves the configuration when powered off/on. For more

information, see “Using Telnet

”.

● Embedded Web server. You can browse to the embedded Web

server on the HP Jetdirect print server to set configuration

parameters. For more information, see Chapter 4

● Printer Control Panel. (HP Jetdirect 620n print servers only)

You can manually enter the configuration data using the printer

control panel keys. The control panel method allows you to

configure only a limited subset of configuration parameters.

Therefore, control panel configuration is recommended only

during troubleshooting or for simple installations. If control

panel configuration is used, the print server saves the

configuration when powered off/on. For more information, see

“Using the Printer Control Panel

”.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 263 264

Sem comentários

HP 620n Guia do Utilizador Página 39