HP Embedded Firewall Series Manual do Utilizador descarregar pdf (Página 23)

Verifying or Modifying NIC Parameters

When a NIC configuration is saved, the NetWare install program adds load and bind

statements to the autoexec.ncf file. By accessing this file, you can verify the parameters

configured for each NIC, modify them, or enter additional parameters.

A valid autoexec.ncf file is shown below. One set of load and bind commands is shown

for each frame type the NIC is configured to support.

set Time Zone = PST8PDT

set Daylight Savings Time Offset = 1

set Start Of Daylight Savings Time = (APRIL SUNDAY FIRST 2:00:00

AM)

set End Of Daylight Savings Time = (OCTOBER SUNDAY LAST 2:00:00

AM)

set Default Time Server Type = SINGLE

set Bindery Context = O=LAN

# WARNING!

file server name NOVELLSERVER

# WARNING!

# If you change the name of this server, you must update

# all the licenses that are assigned to this server. Using

# NWAdmin, double-click a license object and click

# Certificate Assignments. If the old name of

# this server appears, you must delete it and then add the

# new server name. Do this for all license objects.

ServerID 1C8EE2C

LOAD ODINEB.NLM

LOAD TCPIP LOAD 3c99x SLOT=2 FRAME=Ethernet_802.2

NAME=3c99x_1_E82

BIND IPX 3c99x_1_E82 NET=FAFD3D25

LOAD 3c99x SLOT=2 FRAME=Ethernet_802.3 NAME=3c99x_1_E83

BIND IPX 3c99x_1_E83 NET=5A2D8D6D

LOAD 3c99x SLOT=2 FRAME=Ethernet_SNAP NAME=3c99x_1_ESP

BIND IPX 3c99x_1_ESP NET=477A35BD

LOAD 3c99x SLOT=2 FRAME=Ethernet_II NAME=3c99x_1_EII

BIND IPX 3c99x_1_EII NET=C3C8F2E4

BIND IP 3c99x_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0

mount all

SEARCH ADD SYS:\JAVA\BIN

SEARCH ADD SYS:\JAVA\NWGFX

NOTE: The Novell monitor program and the config command are also useful for

verifying driver configuration. For information on how to use these programs, see

the Utilities Reference in your Novell NetWare online documentation.

NOTE: If you modify any NIC parameters, you must reboot the system before the

changes will take effect. If you make changes and do not reboot, you may

experience configuration problems. If the driver was loaded at console, however,

no reboot is necessary.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Comentários a estes Manuais

Sem comentários

HP Embedded Firewall Series Manual do Utilizador Página 23

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP Embedded Firewall Series