HP Embedded Firewall Series Manual do Utilizador descarregar pdf (Página 66)

12 Troubleshooting the NIC

Removing 3Com DynamicAccess Advanced Server

Features

Follow the steps in this section to remove 3Com DynamicAccess Advanced Server features

from your operating system.

Windows 2003, Windows XP, and Windows 2000

The Windows 2003, Windows XP, and Windows 2000 systems do not allow you to

uninstall the 3Com Advanced Server technology miniport using the Device Manager. To

remove 3Com DynamicAccess Advanced Server features:

1 Launch the Network and Dial-up Connections window.

2 Select a Local Area Connection icon.

3 Click the right mouse button and select Properties from the menu.

The Local Area Connections Properties window appears.

4 Click the General tab.

5 In the General window, select DynamicAccess Protocol and click Uninstall.

Windows NT 4.0

To remove 3Com DynamicAccess Advanced Server features:

1 From the Start menu, select Settings/Control Panel.

2 Double-click the Network icon.

3 In the Network window, click the Protocols tab.

4 In the Protocols tab, select DA Pass Thru Driver Transport.

5 Click Remove.

6 Follow the prompts to remove the software and reboot the server.

NetWare

To remove 3Com DynamicAccess Advanced Server features:

1 Enter this command at the prompt:

load nwconfig

2 In the Installation Options screen, select Product options.

3 In the Other Installation Actions screen, select View/Configure/Remove installed

products.

The Currently Installed Products screen appears, listing software products that are

installed in the system.

4 From the list of products, select 3Com DynamicAccess Server Features and press Del.

5 Select Yes to remove the software.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 85 86

Sem comentários

HP Embedded Firewall Series Manual do Utilizador Página 66