
7 Novell NetWare Driver Installation
18
Removing Drivers from Autoexec.ncf
To remove the drivers from the autoexec.ncf file, locate the load and bind command
lines and remark them out by inserting the # symbol at the beginning of each command
line.
Example:
# LOAD 3c99x SLOT=2 FRAME=Ethernet_802.2 NAME=3c99x_1_E82
# BIND IPX 3c99x_1_E82 NET=FAFD3D25
# LOAD 3c99x SLOT=2 FRAME=Ethernet_802.3 NAME=3c99x_1_E83
# BIND IPX 3c99x_1_E83 NET=5A2D8D6D
# LOAD 3c99x SLOT=2 FRAME=Ethernet_SNAP NAME=3c99x_1_ESP
# BIND IPX 3c99x_1_ESP NET=477A35BD
# LOAD 3c99x SLOT=2 FRAME=Ethernet_II NAME=3c99x_1_EII
# BIND IPX 3c99x_1_EII NET=C3C8F2E4
# BIND IP 3c99x_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0
Comentários a estes Manuais