HP DL380z Generation9 (Gen9) Virtual Workstation
c04484636 — DA – 15119 Worldwide — Version 2 — January 28, 2015
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of system memory is required per each adapter.
Please see the QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
Select a standup NIC adapter from Core options-Networking section below,
Please see the QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs
These options are upgradeable and can be changed from the original configuration after the system is
shipped.
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of system memory is required per each adapter.
Select one or more Storage options from Additional options section below.
The embedded B140i controller will operate in UEFI only mode. For legacy support an additional
controller will be needed, and for CTO orders please also select the Legacy mode settings part,
758959-B22
This section may contain FIO options, please see HP Storage Controllers section below.
FIO indicates that this option is only available as a factory installable option.
Select one or more Fan Kits from Core options section below.
This section may contain FIO options, please see HP Cooling Options section below.
FIO indicates that this option is only available as a factory installable option.
Select one type of rail kit from Additional options section below.
Please take a moment to review the installation documentation that comes with the system to help you
with the installation of your Gen9 system.
To assist in the installation of the DL380z into the rack, an optional installation tool is available by
contacting your local services representative (p/n 695539-001).
See HP Rack Options in Additional Options section of this QuickSpecs for more rack kit choices.
Caution: HP recommends that a minimum of two people are required for all Rack Workstation installations.
Please refer to your installation instructions for proper tools and number of people to use for any installation.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP
recommends the use of an HP approved configurator. Contact your local sales representative for additional
information.
HP DL380z Gen9 Universal Media Bay FIO Kit
HP DL380 Gen9 Universal Media Bay Kit (AMO)
NOTE: The HP DL380z Gen9 Universal Media bay provides front VGA and 2xUSB 3.0; plus
support for 2xSFF front drives (787843-B21) and ODD support (No included); and can only
be located in Bay1 in either a 8SFF or 8+8SFF front end.
NOTE: This can only be populated in Bay1
HP DL380z Gen9 Graphics Enablement FIO Kit
HP DL380 Gen9 Graphics Enablement Kit (AMO)
(56 páginas)
(17 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais