
HP DL380z Generation9 (Gen9) Virtual Workstation
c04484636 — DA – 15119 Worldwide — Version 2 — January 28, 2015
Memory Subsystem
Architecture
Each Intel® Xeon® E5-2600v3 family processor socket contains four memory channels per installed processor with three
DIMMs per channel for a total of twelve (12) DIMMs or a grand total of twenty-four (24) DIMMs for the system.
Memory Population
guidelines
General Memory Population Rules and Guidelines:
White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.
A minimum of one DIMM is required per server.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
To maximize performance, it is recommended to balance the total memory capacity between all installed processors
and to load the channels similarly whenever possible.
When two processors are installed, balance the DIMMs across the two processors.
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel. Heaviest load
(DIMM with most ranks) within a channel goes furthest from the processor.
RDIMMs operating at either 1.35V or 1.5V may be mixed in any order, but the system will power them at the higher
voltage.
Do not mix RDIMMs or LRDIMMs.
LRDIMMs are supported up to 3 DIMMs per channel.
Comentários a estes Manuais