HP rp2450 Manual descarregar pdf (Página 193)

Chapter

Memory DIMM Replacement

277

Memory DIMM Replacement

Memory DIMMs reside in sockets located on the right side (from the front) of the System Board.

CAUTION Ensure that the system is shut down and power removed from the server before attempting

removal or replacement of a component.

To replace a memory DIMM, perform the following steps:

CAUTION Be careful to insert the DIMM into the socket evenly. Do not rock the DIMM when seating it.

Step 1. Match the guide slots on the bottom of the DIMM with the guides on the socket and seat the

memory DIMM into the socket. Insert the DIMM connectors into the guides until the card snaps

firmly in place. It may be necessary to apply downward force using the palm of your hand on the

DIMM. Ensure that one side the DIMM is not higher than the other.

Step 2. Use the BCH command in me to verify that the system recognizes the memory that you have just

replaced.

The following picture shows the memory DIMMs located on the right side (from the server front) of the server

system board.

The following graphic is a drawing of a generic memory DIMM, followed by drawings that show DIMM

removal/replacement.

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 201 202

Sem comentários

HP rp2450 Manual Página 193