HP Workstation x4000 Especificações descarregar pdf (Página 35)

System Board

Expansion Card Slots

Chapter 2 35

Expansion Card Slots

The x4000 expansion card slots are described in the following sections:

• “Peripheral Component Interconnect (PCI) Slots” on page 35

• “Accelerated Graphics Port (AGP) Slot” on page 36

• “System Memory and Processors” on page 37

Peripheral Component Interconnect (PCI) Slots

The x4000 system board has ﬁve PCI slots available:

• Three 5 V, 33 MHz, 32-bit slots

• Two 3.3 V, 66 MHz, 64-bit slots

NOTE Cards requiring 5 V must go in the 32-bit slots. Cards requiring 3.3 V

must go in the 64-bit slots. Universal cards, which use either voltage,

can be placed in either slot, but can only function at 66 MHz in the

64-bit slots.

The total power consumption across all used PCI slots depends on what

type of AGP graphics card is installed. When there is an AGP Pro 50

card, the maximum is 80W total across all PCI slots. When there is an

AGP Pro 110 card, the maximum is 45W. The power consumption must

comply with the electrical speciﬁcations of the PCI 2.2 speciﬁcation.

Table 7-1 on page 94 describes the PCI 33 MHz, 32-bit connector. Table

7-2 on page 97 describes the PCI 66 MHz, 64-bit connector.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 237 238

Sem comentários

HP Workstation x4000 Especificações Página 35