HP xw4200 Especificações Rápidas descarregar pdf (Página 45)

Troubleshooting

Getting Started Guide www.hp.com 4–11

Interpreting xw4100 Diagnostic Lights and Audible

Codes

This section covers the front panel light (LED) error and operation

codes as well as the audible codes that may occur before or during the

Power-On Self-Test (POST).

NOTE: If you see blinking LEDs on a PS/2 keyboard, look for blinking

LEDs on the front panel of the workstation and refer to the following

table to determine the front panel LED codes.

Recommended actions in the following table are listed in the order in

which they should be performed.

Power LED blinks Red six

times, once every

second, followed by a

two second pause, and

the workstation beeps six

times.

Video card is not

seated properly or is

bad, or system

board is bad.

For systems with a graphics

card:

1. Reseat the graphics

card. Power on the

system.

2. Replace the graphics

card.

3. Replace the system

board.

Problem

Probable

Cause

Recommended

Solution

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 61 62

Sem comentários

HP xw4200 Especificações Rápidas Página 45