HP xw4200 Especificações Rápidas descarregar pdf (Página 57)

Troubleshooting

Getting Started Guide www.hp.com 4–23

System does not

power on and LEDs

are not blinking.

None System

unable to

power on.

Press and hold the power

button for less than 4 seconds.

If the hard drive LED turns

green, then:

1. Remove the expansion

cards one at a time until

the 5.5 V_aux light on the

system board turns on.

2. Replace the system board.

OR

Press and hold the power

button for less than 4 seconds.

If the hard drive LED does not

turn on green then:

1. Check that unit is plugged

into a working AC outlet.

2. Open hood and check

that the power button

harness is properly

connected to the system

board.

3. Check that both power

supply cables are properly

connected to the system

board.

4. Check to see if the 5.5

V_aux light on the system

board is turned on. If it is

turned on, then replace

the power button harness.

5. If the 5.5 V_aux light on

the system board is not

turned on, then replace

the power supply.

6. Replace the system board.

Activity Beeps

Possible

Cause

Recommended

Action

1 2 ... 52 53 54 55 56 57 58 59 60 61 62

Comentários a estes Manuais

Sem comentários