HP SuperStack Firewall Series Manual do Utilizador descarregar pdf (Página 135)

Using the Firewall with Check Point Firewall-1 135

selected for Firewall VPN. If SecuRemote is used, FWZ must also be

selected.

2 Create the Remote Object(s). These are the resources behind the remote

Firewall (Workstations, Network or Group Objects). Refer to the following

example:

a From the Manage menu select Network Objects.

b Press the New button and select Network.

c Give the Network Object a unique name: (for example

“Firewall-Network”)

d Give the Network Object an IP Address Range (for example

“10.1.1.0”)

e Give the Network Object a Subnet Mask (for example

“255.255.255.0”)

f Give the Network Object a Comment (optional)

g Select External for the Location Option

h Press the OK button when finished.

3 For easier management, you should create a group and place all objects

that are protected by the remote Firewall in that group.

a Press the New button and select the Group option.

b Give the Group object a unique Name (for example

“Encrypt-Firewall”)

c Give the Group object a Comment (optional)

d Select the objects that are behind the remote Firewall and Add them

to the group.

e Press the OK button when finished.

4 Create a remote Firewall object.

a Press the New button and select the Workstation option.

b Give the workstation object a unique name (for example

“Firewall-Remote”).

c Give the workstation object the external IP address of the Remote

Firewall (for example “111.111.111.111”).

d Give the workstation object a comment (optional).

e Select External for the Location.

DUA1611-0AAA02.book Page 135 Thursday, August 2, 2001 4:01 PM

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 213 214

Sem comentários

HP SuperStack Firewall Series Manual do Utilizador Página 135