HP SuperStack 3 Load Balancer Appliance Manual do Utilizador descarregar pdf (Página 55)

Defining a Cache Subnet 55

Defining a Cache

Subnet

Before you can add a cache, you need to have defined at least one cache

subnet.

The cache subnet cannot be in the same subnet as the server.

Non-redundant

Configuration

The following steps describe how to create a cache subnet if you are

configured for non-redundant server load balancing.

To create a cache subnet, complete the following steps:

1 Click Logical View on the Toolbar.

2 From the Navigation tree, select System > Setup > Cache Subnets.

3 Click Add. The first wizard page appears.

4 Click Next. The Cache Subnet - Configure Address page appears.

5 Enter 192.168.3.200 in the IP Address field.

6 Enter 255.255.255.0 in the Subnet Mask field.

7 Click Next. The Cache Subnet - Floating Address page appears.

8 Complete the entry in the Floating Address field. This is the floating

default gateway IP address. For example, 192.168.3.150.

Do not forget to change the default gateway on your caches to this IP

address.

9 Click Next. The Cache Subnet page appears.

10 Click Finish. Your cache subnet has been added.

slb_gsg.bk Page 55 Thursday, May 31, 2001 8:57 AM

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 98 99

Sem comentários

HP SuperStack 3 Load Balancer Appliance Manual do Utilizador Página 55