HP 200 Manual do Utilizador descarregar pdf (Página 541)

100

101

claim token frame when it detects that the ring does not contain an

active monitor, or that the active monitor is not functioning properly.

ring_rem_station contains the number of times the token-ring

adapter removed itself from the ring after receiving a remove ring

station frame. A remove ring station frame is issued from the network

manager and forces an adapter to remove itself from the ring.

ring_sig_loss contains the number of times the token-ring adapter

detected a loss of signal on the ring.

ring_soft_err contains the number of report error frames transmit-

ted by the token-ring adapter. A report error frame is transmitted in

response to a soft error. A soft error is one that temporarily degrades

system performance but may be recovered using standard adapter

protocols.

ring_tx_beacon contains the number of times the token-ring

adapter transmitted beacon frames to the ring. A beacon frame

indicates a hard error. This count specifies the number of hard errors

detected by the adapter; the difference between this count and

ring_hard_err specifies the number of hard errors detected by other ring

stations.

rx_frm_cmpi (rint) contains the number of times the token-ring

adapter received a frame and then generated an adapter-to-attached-

system interrupt. Such an interrupt is enabled or disabled by the frame

interrupt bit (bit 4 of

RECEIVE_CSTAT). Because frames can be received

faster than the adapter can cause the interrupts, each increment of this

counter can report the reception of one or multiple frames.

rx_suspended contains the number of times the token-ring adapter

processed a receive parameter list containing both an odd address in the

forward pointer field (indicating the end of the list) and an end frame bit

equal to 0 (indicating more to follow).

total_adapt_error contains the aggregate count of token-ring

adapter hardware or software errors, the sum of the counts of

adpt_bad_dio_par, adpt_dma_rd_abort, adpt_dma_wr_abort, adpt_

parity_err, and adpt_ring_underrun variables.

Management Information Base Variables

cct: Circuits Information Base

18-40

1 2 ... 536 537 538 539 540 541 542 543 544 545 546 ... 675 676

Comentários a estes Manuais

Sem comentários

HP 200 Manual do Utilizador Página 541

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP 200