HP 4000M Manual do Utilizador descarregar pdf (Página 117)

6-41

Configuring the Switch

Spanning Tree Protocol (STP)

Configuring the Switch

Configuring STP from the Switch Console

In most cases, the default STP parameter settings are adequate. In cases where

they are not, use this procedure to make configuration changes.

Caution If you enable STP, it is recommended that you leave the remainder of the STP

parameter settings at their default values until you have had an opportunity

to evaluate STP performance in your network. Because incorrect STP settings

can adversely affect network performance, you should avoid making changes

without having a strong understanding of how STP operates. To learn the

details of STP operation, refer to the IEEE 802.1D standard.

To Access STP:

1. From the Main Menu, select:

3. Switch Configuration . . .

4. Spanning Tree Operation

2. Press [E] (for E

dit) to highlight the Spanning Tree Enabled parameter.

3. Press the Space bar to select Yes . (This enables STP.)

Figure 6-29. Example of the STP Configuration Screen

4. If the remaining STP parameter settings are adequate for your network,

go to step 8.

Read-Only Fields

1 2 ... 112 113 114 115 116 117 118 119 120 121 122 ... 303 304

Sem comentários

HP 4000M Manual do Utilizador Página 117