HP 4000M Manual do Utilizador descarregar pdf (Página 285)

A-9

File Transfers

Transferring Switch Configurations

File Transfers

2. At the command prompt, execute the following commands:

To upload a configuration to a file on a PC or Unix workstation:

put

IP_address

CONFIG

remote_file

To download a configuration from a file on a PC or Unix workstation:

get

IP_address

CONFIG

remote_file

where:

IP address

is the address of the PC or Unix

workstation in which the configuration is stored (get) or is to be

stored (put).

remote_file

is the name of the configuration file in the PC or

Unix workstation

Using XGet and XPut To Transfer a Configuration Between

the Switch and a PC or Unix Workstation

The PC or workstation must be operating as a VT-100 or ANSI terminal and

connected directly to the switch’s console port. Also, the PC or workstation

must be running an Xmodem-compatible terminal emulation program. If a

manager password has been set, you must log on to the switch using that

password in order to execute the Xget or Xput commands.

Note XGet overwrites the switch’s current configuration with the downloaded

configuration. The switch then automatically reboots itself.

To use XGet or XPut, you need the name assigned to the configuration file on

the PC or workstation.

1. On the PC or workstation, start the Xmodem-compatible terminal emula-

tion program, then follow the instructions provided with the program to

prepare for a file transfer.

2. From the switch’s Main Menu select:

5. Diagnostics...

Command Prompt

1 2 ... 280 281 282 283 284 285 286 287 288 289 290 ... 303 304

Sem comentários

HP 4000M Manual do Utilizador Página 285