HP 4000M Manual do Utilizador descarregar pdf (Página 175)

6-99

Configuring the Switch

IP Multicast (IGMP) Features—Multimedia Traffic Control

Configuring the Switch

Figure 6-66. Example of the (Default) IGMP Service Screen

2. Press the Space bar to select Yes (to enable IGMP).

3. Use [v] to highlight the Forward with High Priority parameter.

4. If you want IGMP traffic to be forwarded with a higher priority than other

traffic on the switch or VLAN, use the Space bar to select Yes. Otherwise,

leave this parameter set to No.

5. Use [v] to highlight the IP Mcast parameter setting for a port you want to

reconfigure. (The options are: Auto, Blocked, and Forward. Refer to the

previous page or online Help for further information on these choices.)

6. Repeat step 5 for each port you want to configure.

7. When you are finished configuring the IP Mcast parameter for the dis-

played ports, press [Enter] and [S] (for S

ave) to activate the changes you’ve

made to the IGMP configuration.

8. Return to the Main Menu. (It is not necessary to reboot the switch. The

new IGMP configuration is implemented when you select “Save” in step 7.

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 303 304

Sem comentários

HP 4000M Manual do Utilizador Página 175