HP xw2x220c Guia do Utilizador descarregar pdf (Página 47)

●

DefaultPolicy—string value. This is the policy that should be selected by default in the client’s

Load Predefined Settings list on the Other tab of the Options section. It is not related to HP SAM

policies set in the HP SAM administrative console.

●

Autodial—integer value, 0 or 1. If value is set to 1, the program automatically tries to connect

on startup, without waiting for the user to type logon information. Default value is 0.

●

DefaultUsername—string value. If value is not specified, the program attempts to determine the

user name from the user’s logon information, which may or may not be accurate.

●

DefaultInsecurePassword—string value. You can use this field to pre-populate the password

box. This field was intended for automated load testing in an environment where security is not of

importance.

CAUTION: The DefaultInsecurePassword field is in plain text format and should not be

used in a production environment.

●

Debug—integer value, 0 or 1. If value is set to 1, debug logs for troubleshooting purposes are

captured to /tmp/hprdc.log. This option is valid only on the Linux Client. Default value is 0.

●

Failover—integer value, 0 or 1. When set to 1, enables the failover capability of the access

device. If multiple web servers are defined, the access device fails over to the next available HP

SAM web server when a connection fails. Turning this feature on limits the user’s ability to type in

a new HP SAM server; the user still has the ability to choose between web servers defined in the

configuration file. Default value is 0 (off).

●

EnablePublicRoles—integer value, 0 or 1. If set to 1, the HP SAM client will show any

available public roles for the user to connect to. If set to 0, the HP SAM client will hide public

roles. Default is 1 (show).

●

ResetAfterSession—integer value, 0 or 1. If set to 1, access device settings, including

username, are reset back to defaults after each session. This is useful in kiosk mode to clear

previous user settings. The default is 0.

●

DefaultMonitorLayoutID—string value. The string value designates the Monitor Layout ID to

be used by default when logging in from the access device. This setting only takes effect when

new access devices are registered upon connection. To have this setting apply to existing access

devices, delete them from HP SAM so they will re-register.

●

AssetGroup=AssetGroupList—AssetGroupList refers to another section in the file with a

matching name [AssetGroupList] which has one or more Asset Groups listed in it.

●

ConnectionBar.Enable—integer value, 0 or 1. When set to 1, the HP SAM connection bar is

enabled. Set this value to 1 to allow the user to manage multiple connections using the HP SAM

connection bar. This also prevents the user from opening multiple instances of the client. The

default value is 1 for Blade Workstation Client series and Linux Client and 0 for all others.

●

ConnectionBar.FollowMouse—integer value, 0 or 1. When set to 1, the connection bar is

open on the monitor where the cursor is. The default value is 1.

●

ConnectionBar.Location—integer value. Sets the location of connection bar (if 0, top; if 1,

bottom; if 2, left; if 3, right). The default value is 0 (top).

●

ConnectionBar.EnableAddNew—integer value, 0 or 1. When set to 1, enables the Add

New button on the connection bar. The default value is 1.

Install and Validate the HP SAM Client Software

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 109 110

Comentários a estes Manuais

Sem comentários

HP xw2x220c Guia do Utilizador Página 47

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP xw2x220c