Hp NonStop G-Series Manual do Utilizador descarregar pdf (Página 55)

Switch Modules

ServerNet Nomadic Disk (Release 2) User’s Guide—523968-001

4-5

SCC LEDs

The front panel of the SCC contains the LEDs described Table 4-2.

Caution. Do not attempt to replace the switch module, attempting to do so could damage the

equipment. For repair and replacement, contact professional services. The

ServerNet Nomadic

Disk (Release 2) Installation and Service Guide is available to professional services in the TIM

Hardware Service and Maintenance Collection

Table 4-2. SCC Front Panel LEDs

LED Color Indicates Meaning Action

ENV Amber Environmental

fault

Unlit: Voltage and

temperatures are

normal.

No action is required.

Lit: Sensor 1 or sensor 2

temperature is out of

range.

Flashing: voltages for

the SCC are out of

range.

Power off the switch

module immediately

and contact

professional services.

PON Green Power on Lit: SCC is receiving

power

If the LED is lit, no

action is required.

Unlit: SCC is not

receiving power.

Check the power-on

switch located in the

back of the switch

module and the power

cord connections.

TX, port A Amber Transmitting Flashing: port A is

transmitting.

No action is required.

Unlit: port A is not

transmitting.

RX, port A Amber Receiving Flashing: port A is

receiving.

No action is required.

Unlit: port A is not

receiving.

TX, port B Amber Transmitting Flashing: port B is

transmitting.

No action is required.

Unlit: port B is not

transmitting.

RX, port B Amber Receiving Flashing: port B is

receiving.

No action is required.

Unlit: port B is not

receiving.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 147 148

Comentários a estes Manuais

Sem comentários

Hp NonStop G-Series Manual do Utilizador Página 55

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware de computador Hp NonStop G-Series