
Hard drive
NOTE: The hard drive spare part kit includes a hard drive bracket.
Description Spare part number
500-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
611029-001
500-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
614956-001
320-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
611028-001
320-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
614955-001
250-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
611027-001
250-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
614523-001
160-GB, 7200-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
614522-001
160-GB, 5400-rpm hard drive for use in computers with 39.6-cm (15.6-in) displays
615844-001
500-GB, 7200-rpm hard drive 608139-001
500-GB, 5400-rpm hard drive 614958-001
320-GB, 7200-rpm hard drive 608138-001
320-GB, 5400-rpm hard drive 614957-001
250-GB, 7200-rpm hard drive 608137-001
250-GB, 5400-rpm hard drive 493994-001
160-GB, 7200-rpm hard drive 455954-001
160-GB, 5400-rpm hard drive 615040-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 51).
5.
Remove the service door (see
Service door on page 52).
Remove the hard drive from a 39.6-cm (15.6-in) computer:
1.
Position the computer right-side up with the front toward you.
2. Remove the two Phillips PM2.5×6.0 screws (1) and loosen the Phillips PM2.5×11.0 captive screw
(2) that secure the hard drive to the computer.
54 Chapter 4 Removal and replacement procedures
Comentários a estes Manuais