HP 6500A Guia de Início Rápido descarregar pdf (Página 10)

Set up and use fax8

Step 3: Congure fax settings

Change the printer’s fax settings to meet your needs after

you have connected the printer to a phone line.

Note: To use the same fax resolution and lighter/darker

settings for all faxes sent from the printer, congure

the settings as you wish, and then touch Set as New

Defaults.

If you want to congure this setting… …do this:

Auto Answer

Set the answer mode to On if you want the printer to

automatically answer incoming calls and receive faxes. The

printer will answer these incoming calls after the number of

rings that has been specied in the Rings to Answer setting.

1. Touch right arrow

and then touch Setup.

2. Touch Fax Setup, and then touch Basic Fax Setup.

3. Touch Auto Answer, and then touch ON.

Rings to Answer (Optional)

Set the number of rings to answer

Note: The number of rings to answer for the printer

should be greater than the number of rings to answer

for the answering machine.

1. Touch right arrow

and then touch Setup.

2. Touch Fax Setup, and then touch Basic Fax Setup.

3. Touch Rings to Answer.

4. Touch up arrow

or to change the number of rings.

5. Touch Done, to accept the setting.

Where can I change fax settings?

You can congure fax settings using the following tools:

Printer’s control panel

Touch Fax on the printer’s control panel, touch Settings,

and then select the setting you want to congure.

HP software

If you have installed the HP software on your computer,

you can congure fax settings using the software that

was installed on your computer.

For more information about using these tools or settings,

see the user guide.

Step 2: Test fax setup

Test your fax setup to check the status of the printer and make

sure it is set up properly for faxing.

The fax test does the following:

• Tests the fax hardware

• Veries the correct type of phone cord is connected to the

printer

• Checks that the phone cord is plugged into the correct

port

• Checks for a dial tone

• Checks for an active phone line

• Tests the status of your phone line connection

1. From the printer’s control panel, touch right arrow and

then touch Setup.

2. Touch Tools, and then touch Run Fax Test. The printer

displays the status of the test on the display and prints a

report. After the test is nished, the printer prints a report

with the results of the test. If the test fails, review the report for

information on how to x the problem and rerun the test. For

additional troubleshooting information, see ”Problems setting

up the printer” on page 17.

3. Once the fax test has run successfully, go to ”Step 3:

Congure fax settings” on page 8.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 98 99

Comentários a estes Manuais

Sem comentários

HP 6500A Guia de Início Rápido Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Impressora multifunções HP 6500A