HP 6500A Guia de Início Rápido descarregar pdf (Página 9)

English

Set up and use fax 7

Connecting to a DSL/ADSL line

If you subscribe to a DSL/ADSL service, follow these steps to connect the fax.

1. Connect the DSL/ADSL lter and telephone cord provided by your DSL/

ADSL service provider between the telephone wall jack and the DSL/

ADSL lter.

2. Connect the telephone cord provided with the printer between the DSL/

ADSL lter and the 1-Line port on the printer.

1 Telephone wall jack

2 DSL/ADSL lter and telephone cord (provided by your DSL/ADSL service provider)

3 Telephone cord provided in the box with the printer, connected to the 1-LINE port on the printer

Connecting additional equipment

Remove the white plug from the port labeled 2-EXT on the back of the printer, and then connect a phone to this port.

If you are connecting additional equipment, such as a dial-up computer modem or a telephone, you will

need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front and two RJ-11 ports on

the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel splitter which has two RJ-11 ports

on the front and a plug on the back.

Note: If you subscribe to a DSL/ADSL service, connect to the DSL/ADSL lter to the parallel splitter, and then use the HP-

provided telephone cord to connect the other end of the lter to the 1-Line port on the printer. Remove the white plug from the

port labeled 2-EXT on the back of the printer, and then connect a telephone set or telephone answering machine to the 2-EXT

port. Next, connect the second port of the parallel splitter to the DSL/ADSL modem which is connecting to the computer.

1 Telephone wall jack

2 Parallel Splitter

3 DSL/ADSL lter (available from your DSL/ADSL service

provider)

4 Phone cord provided with printer

5 DSL/ADSL Modem

6 Computer

7 Telephone

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 98 99

Sem comentários

HP 6500A Guia de Início Rápido Página 9