HP 12M Manual de Instalação descarregar pdf (Página 27)

2-13

Installing the HP 10/100 Hubs

Sample Network Topologies

Installing the HP 10/100 Hubs

Sample Network Topologies

This section shows you a few sample network topologies in which the HP 10/

100 Hubs are implemented. For more topology information, see the document

Designing HP AdvanceStack Workgroup Networks, which can be found on

the HP network products World Wide Web site, http://www.hp.com/go/

procurve.

For information on 100Base-T network topology rules, see the card “Connec-

tivity Rules for 100T Networks” that is included with your hub.

Connecting End Nodes to HP 10/100 Hubs

“straight-through”

twisted-pair

cables

HP 10/100 Hub

PCs and

peripherals

Server with

“Fast” Ethernet

NIC

Category 5 cable for

100 Mbps connection

to the server

Description Connect end nodes (PCs, workstations, servers, printers and other peripherals) to the HP 10/100

hubs by using “straight-through” twisted-pair cables, as shown in the above illustration. The server

should be connected at 100 Mbps to reduce bottlenecks as multiple users attempt to access the

server.

Cables Used 10 Mbps connections: Category 3, 4, or 5 100-ohm “straight-through” unshielded twisted pair cable

100 Mbps connections: Category 5 “straight-through” unshielded twisted pair cable only

Maximum

Connection

Lengths

100 meters for both 10 Mbps and 100 Mbps connections to end nodes

9934.book Page 13 Thursday, January 14, 1999 12:39 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 65 66

Sem comentários

HP 12M Manual de Instalação Página 27