HP 12M Manual de Instalação descarregar pdf (Página 28)

2-14

Installing the HP 10/100 Hubs

Sample Network Topologies

Installing the HP 10/100 Hubs

Cascading HP 10/100 Hubs – 10Base-T Networks

HP 10/100 Hubs

connected at

10 Mbps

PCs,

printers,

and local

servers

10/100 Hub 24M

Server with

“Fast” Ethernet

NIC

twisted-pair

“straight-through”

cables to end

nodes

twisted-pair “crossover”

cables to other hubs, or

“straight-through” cable if

hub port 1 is used and set to

MDI mode

category 5 twisted-pair “straight-through”

cable for 100 Mbps connection to server

Description For 10Base-T networks, up to five hubs may be cascaded together. Three hubs are shown in the

above illustration. The server should be connected at 100 Mbps to reduce bottlenecks as multiple

users attempt to access the server.

Cables Used 10 Mbps connections: Category 3, 4, or 5 “crossover” twisted pair cable for hub-to-hub (MDI-X–

to–MDI-X) connections. Use “straight-through” cable if one of the hub ports used in the connection

is set to MDI mode. For connections to end nodes (PCs, workstations, servers, printers and other

peripherals), use straight-through cable.

100 Mbps connections: Category 5 “straight-through” twisted pair cable only

Maximum

Connection

Lengths

10 Mbps connections: 100 meters for both hub-to-end node and hub-to-hub connections

100 Mbps connections: 100 meters for connections to end nodes

9934.book Page 14 Thursday, January 14, 1999 12:39 PM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 65 66

Sem comentários

HP 12M Manual de Instalação Página 28