HP SA9200 Guia de Início Rápido descarregar pdf (Página 14)

HP Multi-Site Traffic Director Server Appliance SA9200 Getting Started Guide

1. Type setup at the monitor> prompt to begin initial configu-

ration.

User-entered names and

IP addresses in the

example are for

illustrative purposes

only. The appropriate

values for your

installation may vary.

monitor>setup

Auto config NIC card? [n] --->

1 - 100BaseTx

2 - 10BaseT

Select Media Type (1 or 2): [1] --->

Use Full Duplex? [n] --->y

Done... Ether configuration: 100basetx,full_duplex

If you type “y” to enable

DHCP, the setup process

jumps to the autoboot

step. DHCP

automatically configures

the IP address, netmask

and default route

(gateway) parameters.

Enable DHCP? [y] --->n

Enter domain (’-’ to delete) [] --->yourdomain.com

Primary name server (’-’ to delete) [] ---

>10.54.67.40

Add additional name server (<return> to end)[] --->

Enter IP address [] --->10.1.1.2

Enter Netmask: [] --->255.0.0.0

Enter default route [] --->10.54.67.4

Enter hostname [] --->yourSA9200

During the initial setup,

you should enable

autoboot. This enables

the SA9200 to boot at the

Command Line Interface

prompt after subsequent

restarts. When Autoboot

is disabled, the startup

sequence boots to the

Boot Monitor interface,

displaying the

monitor> prompt.

Autoboot? [enable] --->

2. When you have completed the initial configuration, type boot at

the prompt.

monitor>boot

Current active configuration

----------------------------

Product: HP_SA9200

Version: 3.1

Patch Level: 1.0

Build: D19

----------------------------

Current time: Thu Dec 7 08:03:48 2000

Current Config: default.cfg

Hostname: yourSA9200

Using DHCP: No

IP Address: 10.1.1.2

Netmask: 255.255.0.0

Default Route: 10.54.67.4

Domain: yourdomain.com

Primary nameserver: 10.54.67.40

NIC setup: auto

NTP: Disabled

Autoboot: Enabled

Boot timeout: 5 (seconds)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comentários a estes Manuais

Sem comentários

HP SA9200 Guia de Início Rápido Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP SA9200