HP SA9200 Guia de Início Rápido descarregar pdf (Página 6)

HP Multi-Site Traffic Director Server Appliance SA9200 Getting Started Guide

Cabinet

Side Rail

Installation

Side rail mounting requires the use of the small mounting brackets

and four of the screws.

Small Mounting Brackets

1. Locate the two small mounting brackets and the screws.

2. Attach a side rail to each SA9200 using the rows of five screw

holes on the side of the SA9200, equidistant from the top and

bottom. The screws for this procedure are not provided with the

SA9200; they should be supplied with your side rail hardware.

3. Attach a small mounting bracket to each side of the SA9200,

using two colored screws for each bracket. Use the holes nearest

to the front of the SA9200. Note that the small mounting brackets

have recesses allowing them to fit over the front end of the side

rail.

4. Slide the SA9200 into the cabinet’s receiving rails and secure the

front flange of each mounting bracket with two screws.

Wiring

Connections

To connect the SA9200 to your network

1. Connect the provided power cable.

2. Connect the provided RJ-45 network cable to your network.

NOTE: The RJ-45

Ethernet cables should

not exceed four (4) meters

(13.3 feet) in length.

3. Use the serial cable provided to connect the serial port (labeled

“Console,”) to the serial port of any Terminal. (A PC running

HyperTerminal* is described later in this guide.)

It is recommended that the RJ-45 Ethernet cables used to connect the

the an HP Traffic Director be routed down from their front panel

connectors and toward the rear of the rack, then bundled at the rear of

the rack. Routings at variance with the one described here can result

in unacceptable RF interference.

side-view of

mounting bracket

(connect to SA9200)

side-view of SA9200

(bracket holes)

end-view of

rail-mount holes

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comentários a estes Manuais

Sem comentários

HP SA9200 Guia de Início Rápido Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP SA9200