HP X Unified Security Platform Series Guia do Utilizador descarregar pdf (Página 54)

Chapter 3. Command Reference

46 X Family CLI Reference V 2.5.1

remove id

deletes a firewall rule.

update id

updates or creates a firewall with the specified ID. When a new rule is created, permit, block,

or web-filter must be specified.

authentication < disable | any | group name >

enables or disables authentication.

bandwidth < disable | < rule | session > guaranteed kbps max kbps pri pri >

restricts the bandwidth.

comment “description”

stores a comment for the rule.

counter-clear

clears counters for the rule.

dst-addr < all | group name | subnet ip netmask mask | range ip1 ip2 >

restricts destination addresses in the specified IP range.

logging < enable | disable >

enables or disables logging for the rule.

< permit | block | web-filter > src-zone dst-zone service

Required for a new rule. The variables

src

zone

and

dst

zone

can be this-device to

indicate the local device.

position position

the rule is placed in the specified position.

remote-logging < enable | disable >

enables or disables remote logging for the rule.

schedule < always | name >

schedules execution of the rule, either always or according to a named schedule.

src-addr < all | group name | subnet ip netmask mask | range ip1 ip2 >

restricts source addresses in the specified IP range.

timeout mins

specifies a timeout interval in minutes for the rule.

Using conf t firewall rule

create/update

firewall rule

Use configure terminal firewall rule update to create or update a firewall rule. In this example,

firewall rule 10 is created as a “permit” rule for LAN to WAN and for telnet service only:

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 141 142

Comentários a estes Manuais

Sem comentários

HP X Unified Security Platform Series Guia do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Redes HP X Unified Security Platform Series