HP X Unified Security Platform Series Guia do Utilizador descarregar pdf (Página 72)

Chapter 3. Command Reference

64 X Family CLI Reference V 2.5.1

enable

PIM

Use configure terminal routing to globally enable PIM-DM.

hostname# conf t routing multicast pim-dm enable

conf t server

The configure terminal server command activates and deactivates communications services on the

device.

browser-check | no browser-check

enables or disables browser checking. For browser compatibility information, refer to the

LSM User’s Guide

http | no http

enables or disables the HTTP server.

https | no https

enables or disables the HTTPS server.

ssh | no ssh

enables or disables the SSH server.

conf t service-access

The configure terminal service-access command enables and disables a special remote access user

logs out. If you need technical support again in the future, you must reissue the command. conf t no

service-access disables the remote access login.

Note: When you turn HTTP or HTTPS on or off, you must reboot the device before

changes will take effect.

CAUTION: The conf t server command activates HTTP. HTTP is not a secure service. If

you enable HTTP, you endanger the security of the device. Use HTTPS instead of HTTP for

normal operations.

The SMS requires HTTPS communications. If you turn off the HTTPS server, the SMS will

not be able to manage the device.

Note: When you issue the configure terminal service-access command, the

device will return the serial number and a “salt” value. You must retain these

numbers for the technical support representative.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 141 142

Sem comentários

HP X Unified Security Platform Series Guia do Utilizador Página 72