HP HP ProCurve Series 6600 Especificações descarregar pdf (Página 17)

1-9

Introducing the Switch

Front of the Switch

Introducing the Switch

LED Mode Select Button and Indicator LEDs

The operation of the Mode LED is controlled by the LED Mode select button,

and the current setting is indicated by the LED Mode indicator LEDs near the

button. Press the button to step from one view mode to the next.

Figure 1-6. HP ProCurve 6600-24G and 6600-24G-4XG Switches

Auxiliary

(Green/Orange)

Blinking

green

Data transfer between the switch and a USB device is occurring.

On green USB device is connected to the switch. No data transfer operation is occurring.

Blinking

orange

Indicates an error condition. The switch Fault LED will be blinking simultaneously.

There is a hardware fault associated with the USB device or the USB connector

on the switch.

Blinking

orange

Indicates an alert condition. The switch Fault LED should not be blinking

simultaneously. An alert error occurred in the USB operation that is not caused

by a hardware fault, such as a file transfer error.

Off Indicates that no USB device has been inserted, or that the inserted USB device

cannot be recognized, or that no command file can be found on the inserted USB

device.

The Blinking behavior is an on/off cycle once every 1.6 seconds, approximately.

The Blinking behavior is an on/off cycle once every 0.8 seconds, approximately.

Switch LEDs State Meaning

LED Mode select button

and indicator LEDs

Port LEDs Link and Mode

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 115 116

Sem comentários

HP HP ProCurve Series 6600 Especificações Página 17