HP Integrity rx2600 Informações Técnicas descarregar pdf (Página 39)

HP Integrity rx2620 Upgrade

System Hardware Component Upgrade Instructions

Chapter 1

Removing the PCI Card Cage

To remove the PCI cage from the server, perform the following steps:

Step 1. Lift up on the PCI card cage release lever and the back edge of the PCI card cage and lift the PCI

card cage out of the system.

Figure 1-26 Removing the PCI Card Cage

Removing the System Board

Step 1. Remove the power connector plate.

a. Unscrew the two power connector mounting screws on the back of the system.

b. Reach inside the system to remove the power connectors from the socket. The power connectors

will still be connected to their cables.

Step 2. Remove the VGA port mechanical cover located on the right side of the rear of the chassis (if

necessary). See Figure 1-27 for the location of the cover.

Step 3. Remove the DB9 port mechanical cover located on the MP area of the rear of the chassis (if

necessary). See Figure 1-27 for the location of the cover.

Front of Chassis

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 68 69

Sem comentários

HP Integrity rx2600 Informações Técnicas Página 39