HP Integrity rx2600 Informações Técnicas descarregar pdf (Página 63)

RAID - Smart Array 6402 or 6404 Controller for Internal RAID Installation

Smart Array 6402 RAID or 6404 RAID Cards

Chapter 2

Step 6. Install the Install the Smart Array 6402 or 6404 card.

Figure 2-1 Smart Array 6402 RAID Card (SA 6404 RAID Card not shown)

The following table lists the RAID card components.

Step 7. Slide the RAID card edge-connector into the slot until it is fully seated.

Step 8. Route the new SCSI cable(s) from the internal disks to the Smart Array card and connect the

cables.

a. For simplex mode, connect SCSI cable A7231-63024 to connector A1 on the RAID card. Do not

connect any other SCSI cables.

b. Leave connector A-2 available for external connections.

Step 9. Replace the PCI card cage and top cover and power up the system.

Table 2-2 RAID Card Components

Item

Description

1 Internal SCSI connector, port A1

2 Internal SCSI connector, port A2

3 External SCSI connector, port A1

4 External SCSI connector, port A2

5 Controller battery

6 Battery-backed cache module

7 Connector for expansion board

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 69

Sem comentários

HP Integrity rx2600 Informações Técnicas Página 63