HP Integrity rx2600 Informações Técnicas descarregar pdf (Página 58)

HP Integrity rx2620 Upgrade

System Validation and Reconfiguration Procedures After Hardware Upgrade from rx2600

Chapter 1

System Validation and Reconfiguration Procedures After Hardware

Upgrade from rx2600

The system board upgrade part is configured at the factory with default product, serial and UUID IDs. After

replacing the system board, factory default ID values must be overwritten with actual system values. In

rx2600 machines, the product, serial and UUID actual ID values are stored in both the system and display

boards. Product, serial and UUID IDs can be automatically copied from the display board to overwrite the

default factory ID values on the new system board.

Step 1. Power on the system.

a. Reconnect AC power to rear panel connectors.

b. Press the front panel power switch to power on the server.

Step 2. Restore the product, serial and UUID IDs.

a. Answer Yes to the copy prompt displayed during system power on.

b. Reboot the server.

Step 3. Boot the machine to EFI.

Step 4. Verify system board installation.

a. Enter the info sys command. Verify that the newly installed system board is recognized by the

system. Below is an example of the info sys command output following a successful upgrade:

NOTE The product number is now rx2620 and the product, serial and UUID number

values are populated.

SYSTEM INFORMATION

Date/Time: Aug 3, 2004 15:34:26 (20:04:08:03:15:34:26)

Manufacturer: hp

Product Name: server rx2620

Product Number: AB459A

Serial Number: SGH4414201

UUID: 162D4BA1-4D67-11D8-881B-E20562B8C81F

System Bus Frequency: 199 MHz

Step 5. Verify CPU installation.

a. Enter the info cpu command. Verify that all newly installed processors are recognized by the

system. Below is an example of the info cpu command output following a successful upgrade:

NOTE One processor is installed in the example below.

PROCESSOR MODULE INFORMATION

# of L3 L4 Family/

CPU Logical Cache Cache Model Processor

Module CPUs Speed Size Size (hex.) Rev State

------ ------- -------- ------ ------ ------- --- ------------

0 1 1.3 GHz 3 MB None 1F/02 A1 Active

Step 6. Check the system event log for erroneous system events and run system diagnostics as necessary.

Step 7. Boot the operating system.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 68 69

Sem comentários

HP Integrity rx2600 Informações Técnicas Página 58